What does the shredder need to pay attention to when operating?

1. Regularly check the connection bolts, especially the square head bolts fixing the tooth plate, to prevent loosening.

2. Lubricate every bearing bush, large and small gear and special-shaped gear once or twice per shift to ensure sufficient lubricating oil inside the bearing bush and reduce the over-decomposition loss of sleeve bush and gear.

3, feed size should not exceed the specified size, feeding to be continuous and uniform, to prevent the phenomenon of blocking.

4. Check the temperature of the spare bearing frequently. The temperature rise of the bearing bush should not exceed the room temperature of 25-30c.

5. The bearing slide of the moving roller should be cleaned frequently to remove dust and miscellaneous materials, so as to prevent accidents when materials enter the moving roller and cannot be moved.

6. The power supply of the motor must be disconnected first when the power is cut off suddenly to prevent the accident of sudden call. Then the shredder is not torn material out of the shredder, to prevent the shredder at the start of the load is too large and cut off the safety pin.

7, pay attention to observe the work of the safety pin at any time, found that the power should be cut off immediately after the safety pin is cut off, to prevent the big pulley in the sleeve for a long time to cause excessive wear and even produce the phenomenon of shaft holding and other accidents.

8, the operator must strictly implement the safety technical operation procedures, put an end to the phenomenon of arbitrary operation, to prevent the occurrence of personal and equipment accidents.